Mechanical Instruction - Dell WASHING MACHINE Service Manual

6. Mechanical Instruction

Tools: 2 Power screwdrivers (φ=5mm,L=60mm); 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=11 kgF. Cm; torque B=6 kgF. Cm
bezel
Fig
Rear cover
26
Remark
Remove stand： Remove the 4 screws
and remove the stand ass'y by
Remove the rear cover
Pry the monitor up then find out the hooks'
position, use the tool (like the picture or
other card) to insert into the gap of bezel
and rear cover.
Turn over the monitor as the Fig and take
off the rear cover
Dell E173FPc
torque A