AGFA IMPAX AS300 Installation Manual page 53

3. Navigate to D:\programs\mvf and double-click as300-installer.exe.
4. Type your name (minimum three characters).
This information is recorded in the installer log file.
5. In the Welcome dialog, click Next.
6. In the Select Components dialog, all default packages are selected (as shown in the figure that
follows). Clear the checkboxes of any packages that should not be installed.
7. Clear the Archive Packages checkbox.
8. Select the Optional Packages label, then select the checkboxes of any optional packages that
should be installed.
9. Click Next.
10. When prompted, type the password for the AgfaService user.
IMPAX 6.3 AS300 Installation Guide 53