Installing Video Drivers - AGFA IMPAX AS300 Installation Manual

5. For each logical volume that is required, right-click the remaining free space in the extended
partition and select New Logical Drive. Follow the New Partition Wizard, using the following
settings:
Dialog
Specify Partition Size
Assign Drive Letter or Path
Format Partition
6. Exit Disk Management.
6.

Installing video drivers

Install the video drivers using the Express Setup utility and configure the display settings.
To configure the video drivers
1. Open Control Panel.
2. Select Display.
3. Switch to the Background tab.
4. Configure the following settings:
Setting
Pattern
Picture Display
5. Switch to the Settings tab.
6. Configure the following variables:
Setting
Colors
Screen Area
Advanced: Refresh Frequency
7. Click Apply.
IMPAX 6.3 AS300 Installation Guide
Select
As specified in the table in Information to consider when partitioning
disks (refer to page 30)
• Select Assign the following drive letter
• Assign the letter as specified in the table in Information to
consider when partitioning disks (refer to page 30)
• File System: NTFS
• Allocation Unit Size: Default
• Volume label: As specified in the table in Information to
consider when partitioning disks (refer to page 30)
Variable
None
Tile
Variable
65536 Colors
1024 x 768
85
32