Summary of Contents for DAPC DAPC
- Page 1 Multi-Purpose Spray Gun Operator’s Manual ESPAÑOL ....11-18 FRANÇAIS ... .19-28 Questions? 1-800-888-2468 Part No. D27122 Rev. 1 READ AND SAVE THESE INSTRUCTIONS...
-
Page 2: Safety Guidelines - Definitions
SAFETY GUIDELINES - DEFINITIONS This manual contains indicates an imminently hazardous situation information that is which, if not avoided, will result in death or important for you to know and serious injury. understand. This information re- indicates a potentially hazardous situation which, lates to protecting YOUR SAFE- if not avoided, could result in death or serious TY and PREVENTING... -
Page 3: Specifications
HAZARD Risk of flying objects WHAT COULD HAPPEN HOW TO PREVENT IT Certain parts are under pressure whenever the gun Disconnect the gun from the air line, or completely is connected to a pressurized air line. These parts depressurize the air line whenever the gun is to be may be propelled if the gun is disassembled. -
Page 4: Operation
This spray gun has a siphon and pressure feed setting. It is set at the factory for pressure feed application. Pressure feed mode is used for fast application of heavy material. Siphon feed mode is used for applying light and medium bodied paints (stain, lacquer) to large size jobs such as auto refinishing. - Page 5 TO USE PRESSURE FEED Mix material according the manufacturer’s instructions. Mixture should be smooth and easily pourable. Lumps or foreign particles should be removed by straining through a suitable paint filter. Fill the material cup (a) 3/4 full. Attach material cup (a ) to the gun securely.
-
Page 6: Maintenance
TO CONVERT TO SIPHON FEED Remove set screw from canister top and place it in the lower part of gun head as shown. To operate see steps 2-8 in the “To Use pressure feed” section to continue. MAINTENANCE Always exercise extreme care when using any solvent or thinner. -
Page 7: Troubleshooting
TROUBLESHOOTING NOTICE: See parts list to identify parts referred to in these Troubleshooting steps. Defective Pattern Likely Cause Suggested Remedy Dried material is clog- Soak side-ports in thinner to ging side-port “A” and clean clog. DO NOT poke any causing side-port “B” opening with hard objects. -
Page 8: Parts List
PARTS LIST 19 21 DESCRIPTION DESCRIPTION O-ring Gun Body Assembly Spring Fluid Tip Sleeve Fluid Needle Assembly Retaining Nut Sleeve Spring Hose Connection Fluid Control Knob Air Cap (external mix) Retaining Nut Fluid Tip Trigger O-ring Trigger Pin Retaining Ring Snap Retaining Ring Packing Material Tube... - Page 9 NOTES 9- ENG D27122...
-
Page 10: Limited Warranty
LIMITED WARRANTY DeVilbiss Air Power Company warrants to the original purchaser who uses the product in a consumer application (personal, residential or household usage) that all products covered under this warranty are free from defects in material and workmanship for one year from the date of purchase.