Table of Contents
Advertisement
4. CONNECTIONS
STEP 6:
Slide adjustment handle (Ref. D)
into calibration rod (Ref.B - Fig. 6)
and install bolt and nut.
STEP 7:
Mount lower lift pins (Ref. E - Fig. 7)
onto main frame.
STEP 8:
Mount and center hopper (Ref. F - Fig. 8)
in gearbox assembly. After centered, drill
3 holes in hopper and install bolts.
STEP 9:
Install pendulum tube to
gearbox assembly (Ref. A).
STEP 10:
Measure and install PTO driveline
to gearbox assembly (Ref. A).
STEP 11:
Install all safety and rate decals.
Fig. 6
Ref. E
Fig. 7
Ref. F
Fig. 8
14
Advertisement
Table of Contents
