Page 7
3. Connecting to a Wireless Network
3.3.2 Entering SSIDs Directly
If the desired AP has broadcast turned off, you can save the
AP by entering SSID information directly.
1. Press
(Menu); press
press
(Ok); press
select AP Profile.
to
2. Press
to reach the desired AP profile and press
(Ok). Press
3. Enter the desired AP's SSID and press
4. Follow steps 3-4 specified in Section 3.3.1.
3.4 Tips for Alphanumeric Entry
You can enter alpha and numeric values, such as a WEP
Key, using the F3000 phone keys.
An indicator (
the upper right corner of the screen.
Press
and
For numeric entry, press the desired
key once.
to scroll to WiFi and
to select WiFi Config; press
to select the SSID option.
(Ok).
or
) appears at
indicates Alpha entry;
indicates numeric entry.
to switch between
.
3. Connecting to a Wireless Network
For alpha entry, rapidly press a key to toggle through the
letters assigned to that key. For example,
c, A, B, and C. Rapidly press
entries. Therefore, to enter B, rapidly press
Pause between key presses to enter the next character in
the string. For example, to enter the string "ab", press
once, pause then rapidly press
If you want to change something previously entered, press
(Clear) to delete the character to the left of the cursor;
press and hold
(Clear) to delete all characters. Press
to move the cursor.
4. Auto-Provisioning of F3000 WiFi
Phone
If there are new configuration and software updates available,
once the phone has connected to the Internet successfully via
the Access Point, the F3000 will need to be provisioned with the
latest configuration and software. This process is automatic and
will take several minutes to complete. During this time, several
status messages such as downloading, decompressing will be
displayed on the phone's display. Once complete, the phone will
reboot.
After auto-provisioning, the phone will use the same process as
previously described for connecting to Access Points.
Page 8
enters a, b,
to toggle through the
five times.
twice.
Page 8
Need help?
Do you have a question about the F3000 and is the answer not in the manual?
Questions and answers