Add New Channels - Panasonic TX-47AS802B Manual

Add New Channels

You can add any new channels found automatically to channel list.
1. The signal condition is displayed and press
If you select Any Satellite
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the
●
locked, the search cannot be executed.
If the status is shown as
●
Strength have no indications, please check the dish alignment.
2. Select the search mode with
Channels.
New channels can only be added to the existing channel list from the
●
same satellite.
in Auto Setup, this step is skipped.
Signal Lock status is shown as Locked. If it is not
Not locked
/ and press
- 99 -
OK to access.
and Signal Quality /
OK to start Add New
Signal