Add New Channels - Panasonic Viera TX-L37V20B Operating Instructions Manual

Add Other Sat. channel automatically
You can add any new channels found automatically to Channel List.
Check the signal condition
Other Satellite Add New Channels - Satellite Selection
Satellite Selection Astra2/Eurobird
freesat and other channels
Signal Quality 0
Signal Strength 0
Signal Lock Locked
If you selected "Any Satellite" in Auto Setup,
this step is skipped.
Set the search mode and start Add New Channels
Search Mode
Free Channels All Channels
Other Satellite Add New Channels
Satellite
Astra2/Eurobird
Progress Analogue Scan 0% 21
This may take up to 20 minutes.
No. Channel Name Type
Free TV: 0 Pay TV: 0 Radio: 0
Searching
Check Other Sat. signal
Selects a channel and checks the Other Sat. signal condition.
●
To change the channel
Other Satellite Signal Condition
Channel Name 1 BBC 1 East (W)
Signal Quality 0
Signal Strength 0
Bit Error Rate 0.00E+00
Satellite Astra 28.2° E
10847MHz, V, 22000kS/s
Parameter
10
10
set
start
68
100% 68
Quality
Signal Condition
A good Signal Strength is not an indication of best signal for
Other Sat. reception. Please use the Signal Quality indicator as
follows:
Signal Quality:
●
10
10
●
●

Add New Channels

●
It takes a while to check the connection for your selected
satellite.
●
Ensure that the Signal Lock status is shown as "Locked".
If it is not locked, the search cannot be executed.
●
If the status is shown as "Not locked" and Signal Quality
/ Signal Strength have no indications, please check the
dish alignment.
●
New channels can only be added to the existing Channel
List from the same satellite.
Green bar Good
Yellow bar Poor
Red bar Bad (Check the Satellite dish)
51