Audio Mode; Local Time Setting - Topfield TRF-7260 User Reference

16 Preference Settings

4.1.3 Audio mode

4.2 Local time setting

Basically, there are two audio sources as you can find two audio sockets
on the back panel of the digital receiver. You can enjoy only one source
or both of them in either stereo or mono. Set the Sound Mode option
as you desire.
Apart from this setting, you can change the sound mode with the
button. See §5.2.4 for a detailed description.
The digital receiver can output two types of digital audio signals via
the S/PDIF output. One is an encoded signal, and the other is a de-
coded signal. If you have the digital receiver linked to your audio-
video receiver via the S/PDIF output, you have to set the Dolby Digital
option to PCM, which means that the digital receiver will output en-
coded Dolby Digital audio without decoding so that your audio-video
receiver can decode it. Otherwise, set it to multi-channel, then the dig-
ital receiver will output decoded Dolby Digital audio, scaling it down
to two channels.
NOTE
Only if the service you are currently watching provides a Dolby Dig-
ital audio track, you can enjoy Dolby Digital sound.
You should set your local time for timer events.
Select the Settings > Time menu. You can set the clock manually or
by Greenwich Mean Time (GMT). To use Greenwich Mean Time, take
the following steps:
1. Set the Mode to Auto, then the Time Offset will be enabled.
2. Set the Time Offset option to the time difference between your
time zone and GMT referring to Table 4.1.
3. Make sure the correct time is displayed on the Local Time area.
To set the local time manually, set Mode to Manual and enter the cor-
rect time to the Local Time option with the numeric buttons. The time
format is day/month/year 24-hour:minute. To change the time format to
12-hour format, set the Time Format option to 12 Hours.
If daylight saving time is observed in your state at the moment, set the
Daylight Saving Time option to On.