AOC 193FWK User Manual page 11

FRONT PANEL CONTROL
 Power Button:
Press this button to switch ON/OFF of monitor's power.
 MENU / ENTER :
Activate OSD menu when OSD is OFF or activate/de-activate adjustment
function when OSD is ON or Exit OSD menu when in Brightness/ Contrast
Adjust OSD status.
 Luminance :
Adjust contrast and brightness or function adjust.
*Only adjustable at "STD" mode
 Brightness Preset:
Switch between "STD", "OFFICE" & "VIVID".
 Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
2. When OSD menu is in off status, press this button over 2 seconds to
activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus.
 Power Indicator:
Blue —
Orange —
OSD Lock Function: To lock the OSD, press and hold the MENU button
while the monitor is off and then press power button to turn the monitor
on. To un-lock the OSD - press and hold the MENU button while the monitor
is off and then press power button to turn the monitor on.
NOTES

Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or excessive
dust or mechanical vibration or shock.

Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.

For maximum protection, repackage your monitor as it was originally
packed at the factory.

To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As a
safety precaution, always unplug the monitor before cleaning it.
(see Brightness Preset below)
Power On mode.
Off mode.
10