Jump Starting - Ford 2003 Excursion Owner's Manual

Hide thumbs Also See for 2003 Ford Excursion:
Table of Contents

Advertisement

Roadside Emergencies
11. Lower the wheel by turning the jack handle counterclockwise.
12. Remove the jack and fully
tighten the lug nuts in the order
shown.
13. Stow the the flat tire, jack, jack
handle and lug wrench. Make sure
the jack is securely fastened so it
does not rattle when driving.
14. Unblock the wheels.
Retighten the lug nuts to the
specified torque at 800 km (500
miles) after any wheel disturbance
(rotation, flat tire, wheel removal, etc.).
Bolt size
M14 x 2.0
* Torque specifications are for nut and bolt threads free of dirt and
rust. All 2 piece flat wheel nuts, apply a light machine oil between the
flat washer and the nut. Use only Ford recommended replacement
fasteners.
JUMP STARTING YOUR VEHICLE
The gases around the battery can explode if exposed to flames,
sparks, or lit cigarettes. An explosion could result in injury or
vehicle damage.
Batteries contain sulfuric acid which can burn skin, eyes and
clothing, if contacted.
Do not attempt to push-start your vehicle. Automatic
transmissions do not have push-start capability; also, the
catalytic converter may become damaged.
Preparing your vehicle
When the battery is disconnected or a new battery is installed, the
transmission must relearn its shift strategy. As a result, the transmission
may have firm and/or soft shifts. This operation is considered normal and
166
4
Wheel lug nut torque*
Nm
200-225
1
6
7
3
8
5
2
Lb-ft
150-165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents