Table of Contents
Advertisement
Parameter
RIP Defect
When hackers
attempt to enter
your network,
we can alert you
by email
Your E-mail
Address
SMTP Server
Address
POP3 Server
Address
User Name
Password
Connection Policy
Fragmentation
half-open wait
TCP SYN wait
TCP FIN wait
TCP connection
idle timeout
UDP session idle
timeout
H.323 data
channel idle
timeout
Defaults Description
Enabled
If the VoIP Router does not reply to an IPX RIP
request packet, it will stay in the input queue and
not be released. Accumulated packets could cause
the input queue to fill, causing severe problems for
all protocols. Enabling this feature prevents the
packets accumulating.
Enter your email address.
Enter your SMTP server address (usually the part
of the email address following the "@" sign).
Enter your POP3 server address (usually the part
of the email address following the "@" sign).
Enter your email account user name.
Enter your email account password.
10 secs
Configures the number of seconds that a packet
state structure remains active. When the timeout
value expires, the router drops the unassembled
packet, freeing that structure for use by another
packet.
30 secs
Defines how long the software will wait for a TCP
session to reach an established state before
dropping the session.
5 secs
Specifies how long a TCP session will be managed
after the firewall detects a FIN-exchange.
3600 secs
The length of time for which a TCP session will be
(1 hour)
managed if there is no activity.
30 secs
The length of time for which a UDP session will
be managed if there is no activity.
180 secs
The length of time for which an H.323 session will
be managed if there is no activity.
F
IREWALL
4-49
Advertisement
Table of Contents
