Table of Contents
Advertisement
I
NSTALLATION
Connect the Power Adapter
Plug the power adapter into the power socket on the side panel of the
VoIP Router, and the other end into a power outlet.
Check the power indicator on the front panel is lit. If the power indicator is
not lit, refer to "Troubleshooting" on page A-1.
In case of a power input failure, the VoIP Router will automatically restart
and begin to operate once the input power is restored.
If the VoIP Router is properly configured, it will take about 30 seconds to
establish a connection with the ADSL service provider after powering up.
During this time the Sync indicator will flash. After the ADSL connection
has been established, the ADSL Sync LED will stay on.
2-12
Advertisement
Table of Contents
