More; Settings - Control 4 Control4 System Quick Start Manual

5 Change the light levels as needed.
6
You can go to each light and change the light
levels, and then select Learn for the system to
learn the current light levels.
7 Select Next or Add Lights to add or remove
other rooms.
8 Select Next or Save.
Rename a lighting scene:
1
From the home page, select Lighting.
2 Select Scenes or All.
3 Select the pencil icon in the upper-right corner.
4 Select the scene to edit, and then select
Rename.
5 Use the keyboard to change the scene's name.
6 Select Done, and then Done again.
Activate a lighting scene:
1 From the home page, select Lighting.
2 Select Scenes or All.
3
Select the scene to activate.
Ramp a lighting scene up or down:
1 From the home page, select Lighting.
2
Select Scenes or All.
3 Select the up or down arrows to ramp or fade
the scene.
Control4 System Quick Start Guide
All
Select All at the top of the page to view all lights
and lighting scenes.

More

Use More to view, use, or change Settings, Wakeups,
Motors/Sensors, Blinds, Intercom, and more
(whatever is installed in your system).

Settings

See "Using Settings" in this document for
information about viewing or changing settings.
Wakeups
Use Wakeups to execute a Wakeup event.
NOTE: A Wakeup event must be programmed
in Composer. Talk to your dealer for details.
1 From your Control4 Home page, select More >
Wakeups.
2 Select the Wakeup to execute. Use the scroll
wheel to adjust the time (does not apply to List
Navigators).
10