More; Using Settings - Control 4 Control4 System Quick Start Manual

Room Lights
Change the lights in a room.
1 From the Control4 Home page, select Lighting.
2 Select >> to change rooms.
3 Select a room.
4 Single tap or select a light to turn it on or off.
5 Select and hold the light to display a scrollbar
(Dimmers only) for ramp up or ramp down.
House Lights
Change the house lights.
1
From the Control4 Home page, select Lighting.
2 Select All Lights.
3 Single tap or select to turn all lights on or off.
4 Select and hold All Lights to display a scrollbar
(Dimmers only) to ramp up or down.
Lighting Scenes
Execute Lighting Scenes.
1 From the Control4 Home page, select Lighting.
2 Under Lighting Scenes, select a Lighting Scene
to activate, or edit any scenes that have been
programmed either by you (in Composer HE)
or your Installer. If you have several Lighting
Scenes, use the scrollbar to locate the scene to
activate.

More

Use More to view, use or change Settings, Wakeups,
Motors/Sensors, Blinds, Intercom, etc., (as installed).
Settings
See "Using Settings" later in this document for
information about how to change your settings.
Wakeups
Use Wakeups to execute a Wakeup event.
Control4 System Quick Start Guide
Note: A Wakeup event must be programmed
in Composer Pro or Composer HE. See your
Dealer or Installer for details, or you can
create one using Composer HE.
1 From the Control4 Home page, select More >
Wakeups.
2
Select the Wakeup to execute. Use the scroll
wheel to adjust the time (does not apply to List
Navigators).
Blinds
Use Blinds to view and use your motorized blinds
and drapes.
Motors/Sensors
Use Motor/Sensor to view, sort, or change the
motors and sensors in your home. For example, you
hear someone outside your house late at night, and
you quickly want to make sure all your doors and
windows are locked.
1
From the Control4 Home page, select More >
Motor/Sensor.
2 From the list, view or change the status of
devices that use motors or sensors, for example,
your motion sensors.
3
Select the icon to the left of the motor or sensor
to change its status.
Intercom
If you have two (2) or more of the new 5" or 7"
In-Wall Touch Screens, you can send broadcast
messages, communicate between Touch Screens,
monitor activity in another room, and more. See the
Control4 System User Guide for details.

Using Settings

Use More > Settings to view information about
your system, view or change your Director or
network, add a new Custom Home page, change
your screen saver, add or change wallpaper, allow
Remote Access, register the Controller, use Service
Connection, manage battery power, or adjust the
backlight.
From the Control4 Home page, select More >
Settings. The following icons appear.
9