IKEA Uppleva Instruction Manual page 7

Pairing the 3D glasses with your TV
This product uses RF (radio frequency) technology. To
prevent interference from other TVs, the 3D glasses
need to be paired with your 3D TV the first time they
are used. After pairing, the 3D glasses receive the 3D
signal of the paired TV only. You can use the glasses
with another TV if you pair them with it. You will need
to pair them again if you want to use them with your
original TV.
How to pair your glasses with your TV:
1. Turn on the TV, then set the TV to 3D mode (refer
to the TV manual).
2. Press and hold the Power/mode button on the 3D
glasses for 6 seconds. The LED indicator will blink
if pairing has started. When pairing is in progress,
the LED indicator blinks continuously. The LED
indicator will turn itself off when the pairing is
successful. If the pairing has failed, the LED
indicator will keep blinking until the 3D glasses
enter standby.
3. The 3D glasses will begin to function if the pairing
is completed. You will notice the dark tint of the
lenses changing.
7