High-Efficiency Commercial Gas Series - Service Manual
CURRENT FAULT OR WARNING
When a fault or warning condition has been declared
by the control system it will automatically be displayed
on the UIM display and the back light will blink. You
can choose to leave the current fault or warning
message by pressing the Back key. You can return to
the current fault or warning message through the
control system menu.
ACTION:
To access the current fault or warning message,
press MENU from the default "Desktop" screen.
DISPLAY:
Technical Literature Department
Servicing should only be performed by a Qualified Service Agent
ACTION:
Press the DOWN button until the "Current Fault" sub
menu is highlighted then press the SELECT button.
DISPLAY:
18
Ashland City, Tennessee © 2008