Table of Contents
Advertisement
Contacts
Deleting Entries
Delete an Entry
1 From the Contacts list, scroll to the entry you
want to delete.
2 Press m.
3 To delete the entire entry, select Delete
Contact.
4 Press O and press A under Yes to confirm.
Delete a Number or Address
1 From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
2 Scroll left or right to display the Contacts type for
the number you want to delete.
3 Press m.
4 Select Delete Number.
5 Press O and press A under Yes to confirm.
Checking Capacity
To see how many numbers are stored in Contacts:
1 From the Contacts list, press m.
2 Select Capacity.
44
Creating Pauses and Waits
When storing a number, you can program your
handset to pause or wait between digits while
dialing. A pause makes your handset pause for 3
seconds before dialing further. A wait makes your
handset wait for your response before dialing
further.
This feature is useful when using voice mail or
other automated handset systems that require you
to dial a phone number and then enter an access
number.
To program a pause:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your handset dials
the first 11 digits, pauses for 3 seconds, then dials
the last 4 digits.
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
To program a wait:
Press and hold * until the letter W appears.
The W means your handset waits before dialing
further.
Advertisement
Table of Contents
