Using A Headset; Attaching A Headset; Using A Remote Ptt Button - TELUS i690 User Manual

Using a Headset

If you use a headset or similar device with your
handset, you can set your handset to send
incoming sound to the headset only, or to the
headset and the speaker at the same time:
Note: The preferred connection to your handset
is a wired audio device. If you insert a
wired headset into the audio jack on your
handset, audio will be routed to the wired
headset and you will lose your Bluetooth
headset connection.
1 From the main menu, select Settings >
Advanced > Headset/Spkr.
2 Select HdsetOnly to send incoming sound to
the headset only. -or-
Select Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
Note: If you are using your handset with a
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call. See "Setting Flip Actions"
on page 50.

Attaching a Headset

The i690 is compatible with stereo headsets,
stereo PTT headsets, mono headsets, and mono
PTT headsets.
1 Lift the audio jack cover.
2 Insert the headset connector firmly into the
audio jack. You may have to rotate the headset
connector until it fits securely into the audio jack.

Using a Remote PTT Button

If you are using a headset or other accessory with
a remote PTT button, you can use the remote PTT
button for phone calls, Private calls, and group
calls.
For phone calls, use the remote PTT button to
answer calls, switch between calls, and end calls.
Hold the remote PTT button for less than 2
seconds to answer calls and switch between calls.
Hold the remote PTT button for more than 2
seconds to end calls.
For Private calls and group calls, use the remote
PTT button as you would the PTT button on your
handset.
115