Wireless interactive HH9000 Series Product Manual

Ip camera

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

IP Camera

Product Manual

nolimits.

March 2008, Version 6.0.0.5

Table of Contents

Summary of Contents for Wireless interactive HH9000 Series

Page 1 IP Camera Product Manual nolimits. March 2008, Version 6.0.0.5...
Page 2 IP Camera User Manual The HH9000 Series of video cameras are intended for network video surveillance applications. The H.264 video compression algorithm assures clearer and more fluent image transmission. It uses the latest single chip SOC with a powerful Linux OS that ensures high performance. The built-in web server allows users to conveniently program and control the camera via a web browser.
Page 3: Table Of Contents
IP Camera User Manual Table of Contents 1. Product Overview................................4 Product Features ............................4 Specifications .............................. 4 High Speed Dome Features ........................5 System Requirements..........................5 Overview and Installation ............................6 Wired and Wi-Fi cameras ......................... 6 IR Dome and IR Waterproof IP camera ....................6 Connecting the High Speed Dome......................
Page 4: Product Overview
IP Camera User Manual Product Overview Product Features High-density and programmable communication media processor, SOC single chip solution, equipped with two processors, ARM9 and DSP Supports both high sensitivity CCD and other CMOS sensors Supports day and night applications with infrared. (Refer to model) Supports Optical Zoom and auto-focus functions.
Page 5: High Speed Dome Features
IP Camera User Manual Refer to model: Respectively 10M,20M,30M,50M IR Distance Lens Parameter Refer to model: support Optical Zoom and Auto-Focus function Power Input DC 12V 1A Maximum Power CCD: Less than 4.5W; CMOS: less than 3W Operating Temperature -10℃ ~ +55℃ Operating Humidity 10% ~ 85% Storage Temperature...
Page 6: Overview And Installation
IP Camera User Manual Software ◆IE 6.0 or greater ◆DirectX8.0 or greater ◆TCP／IP protocol Overview and Installation Wired and Wi-Fi cameras Figure 1. Wired IP camera (rear view) Figure 2. WiFi IP Camera(rear view) Interfaces: LAN: Ethernet Port RST: Reset Button DC12V: Power Supply, DC 12V/1A A out:...
Page 7: Connecting The High Speed Dome
IP Camera User Manual Junction Box Junction Box (rear view) Interfaces: PWR: WiFi interface RESET: Reset Button CAMERAPORT: DB15 pin port connecting IP Camera. DC 12V: Power Supply, DC 12V/1A LAN: Ethernet Port AUDIO: Audio Input ALM in: 1 Alarm Input GND: Signal ground, Alarm ground, RS485ground RS485:...
Page 8: Hardware Installation
IP Camera User Manual Hardware Installation 2.4.1 Connecting the IP camera into a Router/Switch/Hub Router/Network Switch/Hub Step 1: Connect the DB15 pin port from IP camera into junction box. 8 /30...
Page 9 Step 2: Connect Cat5e cable to RJ45 port on the junction box. Step 3: Connect power supply (DC 12V or 24V for Dome Camera). Step 4: Connect the other end of the Cat5e cable to your switch. 2.4.2 Connect IP Camera to PC Connect the IP Camera directly to a PC with a Cat5e cable The Network Connection Light will turn orange within 5 seconds.
Page 10: Searching Device And Activex Download To Installation
3. Searching Device and ActiveX Download to Installation 3.1 Searching Device and Modify Network Parameter Use Search NVS software to search and modify network parameters (Such as IP address, subnet mask, Use Search NVS software to search and modify network parameters (Such as IP address, subnet mask, gateway, etc.).
Page 11: Check Connection
Write down the IP Address, Subnet Mask, Default Gateway, then setup the IP Camera address according to your computer’s IP address. For example: 192.168.1.100. Make sure the Default Gateway and Subnet Mask are the same. 【Set Click Parameters】as follows : Modify any relative parameters;...
Page 12: Installing The Activex Control And Logging In
3.3 Installing the ActiveX Control and Logging In You need to install the camera’s ActiveX Control when you access the IP Camera for the first time. In most cases, ActiveX is already installed but needs to be activated when accessing the IP camera. To install ActiveX: Download ActiveX from Internet Explorer: Input the IP address of the IP camera into Internet Explore address bar;...
Page 13: Software Configurations
4. Software Configurations 4.1 IP Camera Live view Live view as follows： In the Live view interface, User can photo Snap, Record, Replay, Speaker, Call, Cancel Alarm and adjust Video Parameters Settings. 【Speaker】Audio Switch on/off：【Snap】Click【Snap】, snapshot is saved in JPG format. 【Record】Manually record the video and is saved in .MP6 format.
Page 14: Ip Camera Video Playback
4.2 IP Camera Video Playback Click【Playback】and you will be directed to the following screen： The user can search for recorded image files or snapped photos on the local PC or storage device filed by date. 【Date】Allows the user to check the recorded image files or snapped pictures by date: 【Local】Check the recorded image files or snapped pictures within your local PC by date.
Page 15: Ip Camera System Settings
Note: The yellow icon means the current time, the blue icon means current optional time. The first row defines the hour unit of the recorded image; the second row defines minute units for the recorded image; the third row defines the hour unit for snapped pictures; the fourth row defines the minute unit for snapped pictures.
Page 16: Ip Camera Video Settings
System Clock: Clicking TIME SYNC will synchronize the camera’s time with the current computer time. 【NTP Parameter】：Input the correct NTP server address and select the correct time zone. After saving, 【Real-time switch to Image】. The NTP sever will show the correct system time. 【System Information】Displays device name, device number and user-defined device name.
Page 17 【Advanced image setting】 as follows: 【Audio】： Set audio ON/OFF （ Default: OFF） ,there are two models: Mic and Line input. If users don’t need audio status; please close audio input to save the DSP resource and network resource. 【Video Mask Set】：Mask all image or Mask part image, the whole image divided into 22 * 18 blocks.
Page 18: Ip Camera Motion Alarm Settings
4.5 IP Camera Motion Alarm Settings Setting motion alarm parameters: include the scheduled time, sensitivity, alarm output, alarm delay, and trigger image captures to your PC or the SD card (if one is present). 【Schedule time setting】Set the time of motion alarm detection. 【Alarm output】Alarming, alarm signal output.
Page 19: Ip Camera Sensor Alarm Settings
4.6 IP Camera Sensor Alarm Settings Setting sensor alarm parameters: included the schedule time, switch of the alarm, sensor type, alarm output, alarm delay, alarm record on PC or alarm capture on SD card when alarming. 【Schedule time setting】Set the time of sensor alarm detection. 【Alarm output】Alarming, alarm signal output.
Page 20: Ip Camera Network Settings
4.7 IP Camera Network Settings The device will restart after setting any basic parameters. If the IP camera is connected to your LAN, make sure its IP address does not conflict with any other devices on the network. 【IP address】The camera’s own address on the network. 【Gateway】Wireless network gateway (wireless router/AP), for example: 192.168.1.1 【SSID number】...
Page 21: Ip Camera Advanced Parameters
4.8 IP Camera Advanced Parameters Mail Setting：When a motion alarm is triggered, the device will send an alert to the provided email address. 【SMTP Server】Email server address. 【Mail From】The FROM portion of the email header. 【Mail To】 The receiving email address. 【SMTP User Name】The user name required to access the SMTP mail server.
Page 22: Ip Camera User Management
4.9 IP Camera User Management You can setup two users for one IP Camera. One administrative account and one guest account. You can setup two users for one IP Camera. One administrative account and one guest account. Administrators can set parameters for the IP Camera, however guests cannot. Administrators can set parameters for the IP Camera, however guests cannot.
Page 23: Ip Camera Storage Equipment
Dome and Pan Decoder connect with RS485 port. When there is control device to connect with IP Camera, RS485 parameters need to be set according to the settings of the control device (Address, Protocol, Bit rate), and download the corresponding protocol. 4.11 IP Camera Storage Equipment 23/ 30...
Page 24: Appendix 1. Network Interface For Ip Camera
Appendix 1. Network Interface for IP Camera Network ports for the IP Camera: 80(Web port) 5000(Communication port, Audio/Video data transmitting Port, Talk data transmitting Port) 5000(Audio/Video data transmitting Port) Multiple Multiple original port + Channel Number port Appendix 2. Network Parameter Defaults Network parameter defaults Wired network parameters default：...
Page 25 1. Login to the camera using Internet Explorer and select [ network setting ]; 2. Fill in the desired local IP address for your camera. 3. Enter a subnet mask. 4. Enter the gateway address. If you’d also like to use the camera in a wireless environment, make sure the Wi-Fi Parameters are configured as well.
Page 26 Simply check Enable DHCP. 2. Internet You can connect the IP camera to the internet in three ways: Fixed IP mode, ADSL, and ADSL and IP camera’s PPPoE accesses the internet mode. After IP camera connects the Internet, the long-distance Internet user can visit the camera in the network via domain name or the IP address form directly.
Page 27 The lining drawing as the following： Fills the username and password which applies in the DDNS server on the DDNS setting item, makes the port mapping on the router, the router judges basis different port and changes to the IP camera which must be visited, the long-distance Internet user can visit the camera in the network via domain name form directly.
Page 28 ADSL and IP camera’s PPPoE accesses the internet mode Fills the username and password which applies in the DDNS server on the DDNS setting item, then fills the PPPoE username and password which applies in the network servicer on the PPPoE setting item, clicks 【Save】finished ADSL Modem connect with IP camera.The long-distance Internet user can visit the camera in the network via domain name form directly.
Page 29 You can install the ActiveX Control in two ways: (1) Auto-Installation You need to lower the security level of the IE temporarily in order to install ActiveX Control into your PC as follows: Choose Internet Options: TOOLS > INTERNET OPTIONS Click SECURITY and your current security setting is displayed.
Page 30 9. The audio quality is poor or unclear. Reason: When there are many noises for the Audio and the distortion is very serious, please check the input signal level, if it is not lineate input, the signal level is not matching with the signal level of IP Camera.