Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ecotech Marine MP40w ES VorTech
Summary of Contents for Ecotech Marine MP40w ES VorTech
- Page 1 Setup Guide ® 070113...
-
Page 2: Table Of Contents
EcoTech Marine website at ecotechmarine.com/media-gallery/video purchase of a VorTech MP40w ES ™ The EcoTech Marine Community is another tool for users to troubleshoot and learn about our products. For additional information about your VorTech community.ecotechmarine.com. Propeller Pump! Propeller Pump, please visit us at UNITED STATES &... -
Page 3: Inside The Box
Inside the Box Maintenance Your VorTech Propeller Pump is designed to operate optimally with little attention after initial setup; however, due to the harsh conditions of a saltwater aquarium and resulting buildup of algae and other organic matter, it is advisable to clean your wet side to ensure the longevity PowEr SUPPLY PowEr Cord FoaM GUard... -
Page 4: Installing The Vortech
Installing the VorTech STEP 4: Correctly Set Pin Spacer ™ • Determine the glass thickness by measuring it (or contact the aquarium manufacturer). • Remove the rubber spacer from the bottom of the STEP 1: Choose Pump Location motor housing (Figure B). •... - Page 5 Installing the VorTech ™ Continued STEP 6: Attach Wet Side STEP 7: Align Pump • Place the wet side into the aquarium and allow ALL air to • Plug the power supply into the driver. If the pump is not escape from the propeller housing.
-
Page 6: The Ecosmart Driver
The EcoSmar t Driver Mounting the Driver 1. Mount the driver where it will not get wet using the included velcro strips (Figure A). Wireless Indicator The driver is NOT water proof, and water SET Button damage will NOT be covered under warranty. LED Strip Figure A MODE Button... -
Page 7: Operational Modes
EcoSmar t Driver Operational Modes (Hold) – Feed Mode (Hold) – Power off LED bar will indicate change between modes. -
Page 8: Tidal Swell Mode
Tidal Swell Mode Nutrient Transport Mode Tidal Swell Mode (TSM) creates a harmonic Nutrient Transport Mode (NTM) creates circulation balance reminiscent of the changing flow in a two-phase program. The first phase uses wave conditions found in nature. Over the course of motion to stir up detritus. -
Page 9: Short Pulse Mode
Short Pulse Mode Long Pulse Mode When first entering Long Pulse Mode, set the maximum When first entering Short Pulse Mode, set the pump speed with the control dial and press the SET maximum pump speed with the control dial and button to lock it. -
Page 10: Reef Crest Random Mode
Reef Crest Random Mode Lagoonal Random Mode Reef Crest Random Mode simulates a high-energy reef Lagoonal Random Mode simulates a low-energy environment. It is indicated by both a yellow control lagoon environment. It is indicated by a yellow control dial and the first two blue LEDs illuminated. The control dial and the third and fourth LEDs illuminated. -
Page 11: Troubleshooting
Propeller Pump consists of a wet side operating unit that will be fully submerged in the aquarium and a motor and driver that must not be exposed to water at any time. EcoTech Marine’s warranty shall not apply: (i) to any damaged VorTech... -
Page 12: Regulatory Information
• Danger: To avoid possible electrical shock, special care should be taken since water is employed in the use of RF Module. Use of this module in products not consented by EcoTech Marine is prohibited. This product is for aquarium equipment.
Need help?
Do you have a question about the MP40w ES VorTech and is the answer not in the manual?
Questions and answers