Table of Contents
Advertisement
IP configuration
You may assign a dynamic IP address to the digital receiver. To
do so, set the DHCP option to On. You can view the dynamic
IP address assigned to the digital receiver by your router at the
WLAN Status menu.
Whenever the digital receiver is restarted, the dynamic IP ad-
dress will be changed and you will have to check it at the
WLAN Status menu to access the digital receiver. To avoid this
cumbersome thing, you had better assign a static IP address
rather than dynamic one.
Set the DHCP option to Off, then the IP Address, Subnet Mask
and Gateway options become enabled. You have to set these
options to match the configuration of your router.
Set the User ID and Password options as you desire. When you
access the FTP server, you will be asked for the account that is
made with these options
NOTE
You can access the FTP server with an anonymous account.
However, with an anonymous account you can only download
files. You cannot upload files.
8.2 Configuring the digital receiver 65
Select the Installation
ting
IP Configuration menu.
LAN Set-
Advertisement
Table of Contents
