Advertisement
Mounting
Tweeter
o
Mounting
area on
the vehicle
or board
Woofer
o
Mounting
area on
the vehicle
or board
Before connecting
Connecting the speaker cords
•
Speaker cords are not supplied.
Woofer
o
Loosen
Fasten
Connection
Cut-off frequency:
4.5 kHz and above -12dB/oct.
IN
Receiver or
Amplifier
(not supplied)
B
4
Mount the protection bar
with its straight portion facing
Terminal side
inwards.
A 8
D
D
The protection bars are
provided as protection for the
wood cone diaphragm.
Please use as necessary.
Terminal side
Tweeter
o
5.2mm
2.8mm
10mm
Tweeter
Tweeter
Output
Woofer
Output
Crossover
Network
Woofer
Dimensions
Woofer
o
134
55.5
Tweeter
o
4.1
47.4
10.9
18.1
Information for Users on Disposal of Old Equipment
This symbol indicates that the product with this symbol should not be disposed as general household waste
at its end-of-life. If you wish to dispose of this product, please do so in accordance with applicable national
legislation or other rules in your country and municipality. By disposing of this product correctly, you will help
to conserve natural resources and will help prevent potential negative effects on the environment and human
health.
This symbol
is only valid in
the European
Union.
Dear customer,
This apparatus is in conformance with the valid European directives and standards
regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technology Centre Europe GmbH
Postfach 10 05 52
61145 Friedberg
Germany
Unit: mm
11.5
69.5
26.4
28.4
Advertisement
