Parts List
1.
L screw
2.
Washer
3.
Weight base insert
4.
Decorative base plate
5.
Screws (4)
6.
Base tube
7.
Decorate Cap
8.
Extension tube locking nut
9.
Extension tube
10.
Fan head
Assembly Instructions
1. Remove all items of packaging from the fan.
2. Lift the decorative cap (7) and secure the base tube (6) onto the decorative base
plate (4) using the 4 screws (5) provided.
3. Position the weighted base insert (3) under the decorative base and secure with
the L shaped screw and large washer (1 & 2).
4. Assemble the fan head (10) onto the extension tube (9) and tighten the screw
knob to lock the head onto the extension tube. Do not over tighten.
5. To adjust the height of the fan, loosen the extension tube locking nut (8), adjust
to the required height and tighten the locking nut.
Operating Instructions
1. Use in a dry place, free of excessive humidity and water.
2. To set the fan in motion turn the rotary switches at the back of the unit to the
desirable speed:
0 = OFF
3. Turn the switch knob to OFF and unplug the power cord when the fan is not in
use.
1 = LOW
2 = MEDIUM
3
omega altise
3 = HIGH