Table of Contents
Advertisement
LOCKING/UNLOCKING OF THE DOORS
The system operates the door locks, locking them during arming and unlocking them when disarm-
ing the system.
Besides, the system is able to lock the doors automatically upon the ignition activation and to unlock
them after ignition shut-off, if these operations are allowed by the programming (sublevels 7.2, 7.3).
If you need to unlock the doors when ignition is active – shortly press the "VALET" button.
COMPARTMENT LIGHT DELAY
If the option of the compartment light turning off delay is allowed by the programming (sublevel 3.5)
then the system arms door unlocking sensors 15 seconds upon the doors closing. At that the system
does not produce any sonic signal if a door was not closed during the system arming.
VEHICLE TRACING
Pressing of the remote's button "1" in security mode activates the vehicle tracing function. The sys-
tem produces a single light and double sonic signal and then returns to the security mode.
"PANIC" MODE
Regardless of whether the system is armed, armed with a running engine or disarmed, the simulta-
neous pressing of the remote's buttons "1" & "2" will activate the "Panic" function - the system produces
the light and sonic alarm signals and also sends alarm message to the pager.
If the system is disarmed and the engine is running, then turn the system to the perimeter security
mode with a running engine to activate the "Panic" mode. That is to say, to activate the "Panic" mode in
this case you have to:
- press and then release the remote's button "2";
- press and then release the remote's button "1";
- press and hold buttons "1" & "2" of the remote control unit simultaneously;
- release buttons "1" & "2" upon the "Panic" mode activation;
Generation of the sonic signals in "Panic" mode can be cancelled by programming (sublevel 3.2).
Moreover, a message transmitting to the pager can be allowed by the programming (sublevel 6.6).
Press any button of the remote unit to exit "Panic" mode. The system turns to the security mode even
if it was disarmed at the moment of the "Panic" mode activation.
TIMER CHANNEL #1
Timer channel #1 is designed to perform one extra option, subject to your choice. Algorithm of this
channel is set during the system programming (level 5). The channel can be activated during arming, dis-
arming and by simultaneous pressing of the buttons "1" & "3" of the remote control. Duration of the signal
on the timer channel #1 is set during programming.
During the time of the timer channel #1 work as well as within 10 seconds upon its cessation, the
system does not respond to the status of the shock and volume sensors.
You can apply the channel #1 for one of the following purposes:
- dim light turning on during the arming;
- the compartment timed lighting during the disarming;
TIMER CHANNEL #2
ТTimer channel is designed to control the work of the hood or trunk lock. The channel is activated by
the remote's button "3". Signal duration appearing on the channel #2 is 1 second.
If the channel #2 has been activated during security mode then, during the time of its work and within
the 10 seconds upon its cessation the system, still staying armed, does not respond to the status of the
shock sensor and the limit switch of the hood or trunk. If within this period of time neither hood nor trunk
Gorgon G3O3
Advertisement
Table of Contents
