Cadillac CTS Owner's Manual page 12

1-6 Keys, Doors and Windows
The vehicle comes with two
transmitters. Each transmitter
will have a number on top of it,
1 or 2 . These numbers
correspond to the driver of the
vehicle. For example, the memory
seat position for driver 1 will be
recalled when using the transmitter
labeled 1 , if enabled through the
DIC. See Memory Seat under
Power Seat Adjustment on
page 2 4 and Vehicle
Personalization on page 4 51
for more information.
Programming Transmitters
to the Vehicle
Only RKE transmitters programmed
to the vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased
and programmed through your
dealer/retailer. When the
replacement transmitter is
programmed to the vehicle, all
remaining transmitters must also
Ofrecido por www.electromanuales.com
be programmed. Any lost or stolen
transmitters no longer work once the
new transmitter is programmed.
Each vehicle can have up to eight
transmitters programmed to it.
See Relearn Remote Key under
Driver Information Center (DIC) on
page 4 31.
Battery Replacement
Replace the battery if the Replace
Battery In Remote Key message
displays in the DIC. See Replace
Battery In Remote Key under Key
and Lock Messages on page 4 42
for additional information.
When replacing the
battery, do not touch any of the
circuitry on the transmitter.
Static from your body could
damage the transmitter.
To replace the battery:
1. Separate the transmitter with a
flat, thin object inserted into
the notch, located above the
metal base.
2. Remove the old battery. Do not
use a metal object.
3. Insert the new battery, positive
side facing up. Replace with a
CR2032 or equivalent battery.
4. Snap the transmitter back
together.