4.2.4 The cause and solution of the malfunction
1) Fuser Error
Description : Fuser error is displayed on LCD
1. Check whether a thermostat,
AC wire, and heat lamp are
thermistor is open or not.
due to a gear of a fuser is melted.
Service Manual
Alignment & Troubleshooting
open or not.
2. Check whether a
4. It could not operate
Replace the fuser if a thermostat
is open.
Replace the fuser if a thermistor
sensor is located deep inside of
a sponge.
Check whether the overheat
mode circuit operates normally
or not.
Replace the fuser.
4-53
Samsung Electronics