Collector Fixings - Ariston SOLARcomfort Installation Instructions Manual

5.18 C F
OLLECTOR IXINGS
IMPORTANT
After installation check all clamp nuts
are tight.
Centre Clamp
Bottom Stop
F . 5.18 C
IG A OLLECTOR
22
The two aluminium collector support rails are bolted directly to the roof
fixing straps.
Collector bottom brackets hook over the rails on the front edge of the
collectors to prevent the collectors sliding down.
The extruded section of the support rails is designed to accept M8 hexagon
bolt heads, these are slid in from the end and will remain captive.
The collectors are clamped to the top of the support rails with clamp plates.
Collector
F
IXINGS
Captive Bolts
Outer Clamp
Fixing Strap
Support Bar
M8 Bolt
Support Bar