Pioneer inno User Manual page 81

Troubleshooting
If this happens:
There is no power or your inno shuts
off quickly.
inno shuts off unexpectedly.
You do not receive all the XM channels you
have subscribed to.
No audio.
No song title or artist name is displayed.
No audio when listening to inno through
an FM radio.
Audio fades or has static when listening
through an FM radio.
Audio sounds too soft or is distorted when
listening to an FM radio.
XM Instant Traffic and Weather channels
sound different from other channels.
Controls do not respond.
The controls still refuse to respond, the display
does not change, or the backlight does not
turn on or off.
Battery level meter does not match the
expected charge or playback time.
Customer Support
You should:
Your inno battery may be low. Charge the battery by putting your
inno in the dock station and plugging in the AC adapter.
Check whether you set the sleep timer, and set it to "Off" if desired.
Check whether "Vehicle Mode/Delayed Power Off" is set, and set it to
"Off" if desired. inno remembers the "Vehicle Mode" setting even
when you turn the device off.
Check that you have not skipped any channels (page 74). If you still do
not receive all channels, your inno may not be activated. Contact XM
Satellite Radio.
Check all connections between your inno and your stereo system.
Nothing is wrong with your inno. That information may be in the
process of being updated. Some channels, such as news and sports,
may not have such information.
Check that your inno and your radio are tuned to the same FM
frequency.
You might be hearing interference from another FM station. Set your
inno and your radio to a different FM frequency.
Raise or lower the FM audio level until the sound quality improves.
Nothing is wrong with your inno. These channels use a different
audio technology than the other XM channels.
Check whether the power switch is in the "hold" position.
If so, slide it to the center position to unlock the controls.
Reset your inno by removing and re-inserting the battery.
Fully charge the battery, then use your inno until the battery is
exhausted. This calibrates the battery level meter.
81
Customer Support