Direct Control Of Av Receiver Through Xantech Rs232->Ir - ReQuest Multimedia VideoReQuest Installation Manual

VideoReQuest with Xantech Control
1) Connect the VideoReQuest Audio and Video to the receiver (Can be Composite, S-
Video, or Component).
2) Connect 1-3 DVD Changers' Audio and Video to the receiver.
3) Connect the RS-232 cable from the DVD changers to ports 1 – 3 of the
VideoReQuest.
4) Connect Port 4 of the VideoReQuest to the Xantech RS232IR module.
5) In the VideoReQuest Menu, go to Video Switch setting to set the appropriate
switch.
6) Connect the IR emitter or plug to the receiver.
7) Use Xantech Dragon Drop-IR software to load receiver codes. First code is for
VideoReQuest. Code 2- 4 is for DVD changer 1-3.
Page 6