Advertisement
Page 9
Appendix 2: Safety Procedures
Please follow these safety procedures for a smooth installation and long product life. The
warranty will be voided if these procedures are not followed.
1) Do not open the case of the product to prevent the risk of electric shock.
2) Do not modify any hardware or software of the product without written approval from
ReQuest Multimedia.
3) Any servicing must only be done by ReQuest Multimedia.
4) Please install in a well ventilated area. If mounted in a rack, please place a 1 RU
spacer above the product and 1 RU spacer or non-heat generating equipment below the
product, and make sure a ventilating fan is used on the rack/cabinet.
5) A 3-prong grounded outlet is required for the product. Do not use a 3-prong to 2-
prong "Ground Lifter".
6) To prevent ground loops, please insure that all serial cables, audio cables, and video
cables are connected to devices powered on the same power circuit/outlet.
7) It is recommended to use Uninterrupted Power Supplies (UPS) and/or power
conditioners.
Advertisement
