Table of Contents
Advertisement
7. OPERATION (continued)
7.3 ADJUSTING SPREADING WIDTH
The spreader can be adjusted so that it can spread to different widths and with different types of fertil-
izers. To make this possible you have to operate on the RPM of the PTO and on the vanes position. The
machine is delivered and set to spread to 59 feet.
In order to achiever a good result, first run with the machine spreading only from one side, thus dis-
abling one spreading disc. The spreading will be completed with further runs.
For the next steps you have to use both discs.
If the remaining spreading area is less than 59 feet, you have to adjust one disc in order to spread in a
right way and do not spread in the closer area.
17
Advertisement
Table of Contents
