Table of Contents
Advertisement
3. Display the Important System
Information screen by pressing the SYS
INFO button on the receiver's front panel.
Note: The screen shown here is just an
example. The screen that you will actually
see will contain numbers and information
unique to your receiver.
4. Call the Customer Service Center at
1-888-SKY-DISH. A customer service
representative will help you with your
system and will discuss the various
programming packages available.
5. Choose a package and the representative
will authorize your programming.
6. Press SELECT to close the Important
System Information screen.
7. Press GUIDE. Wait a few minutes and the
channels you purchased will turn from red
to white, and can now be viewed. If your
programming package qualifies, your
receiver should now be capable of
displaying in high definition format.
STEP 2: FINDING PROGRAMS TO WATCH
First, make sure the receiver is turned on.
Press the POWER button on the remote or
press the POWER button on the receiver.
There are two ways to find information on
programs.
• Press GUIDE. When the Program Guide
opens, use the UP or DOWN ARROW to
view information on other channels. After
you have highlighted a program in the
Program Guide, press SELECT to
watch it.
Introduction
Quick Start Guide
Remote
Buttons
1
Menu Options
Page 1-3
Advertisement
Table of Contents
