Table of Contents
Advertisement
User Guide
CONVENTIONS USED IN THIS GUIDE
To make it easy for you to use this guide, we use the following conventions:
• The names of remote control buttons and modes are all uppercase.
Example: Press the SAT button.
• Menus and options that appear on the TV screen are in bold type.
Example: Open the Program Guide.
• Select means to move the highlight to an on-screen option or choice in a list and press
the SELECT button on the remote control.
Example: Select the Locks option.
• Connections on the back of the receiver are in bold capital letters.
Example: SATELLITE IN
Note: To enjoy viewing high definition programming at its highest resolution and quality,
your Bell ExpressVu HD digital satellite receiver must be connected to an HDTV set or
monitor and displayed in a high definition format (1080i or 720p). Your receiver must
also be activated with qualifying programming to display in high definition format.
IF YOU NEED MORE ASSISTANCE
If you need help after you read this guide, call Customer Service at 1-888-SKY-DISH
(3474). You can also call the Customer Service number for information on professional
installation.
QUICK START GUIDE
After your system has been installed, order and watch your programming using the
following steps:
STEP 1: ORDERING YOUR PROGRAMMING
1. Using a remote control, press SAT, and then
press the blank POWER button.
2. Press GUIDE. You will see that some channels
in the Program Guide appear in white.
These channels can be viewed immediately.
However, many channels will be in red. You
cannot view these channels until you order
programming.
Page 1-2
Remote
Buttons
Menu Options
Advertisement
Table of Contents
