Table of Contents
Advertisement
1.0. USER MANUAL
The initial driving attempts should be conducted in a place with free floorspace. Select a low driving
speed (press the "down" button a few times) until you have become used to the wheelchair.
1.1 BEFORE DRIVING
Before you start the wheelchair the following should be checked:
• The foot support is in place and you have both feet properly placed on the foot plate
• The electric lift (the seat) is lowered to the lowest position
• Electric tilt (seat angle) is in a neutral position
• Both motors are engaged (pivoting arm is positioned lengthwise of the wheelchair)
• The wheelchair is switched on by pressing the I/0 button.
1.1.1. GETTING ON AND OFF
Always switch off the wheelchair before getting on and off (the I/0 button)
1.1.2. THE FOOT PLATE
Swing the seat to the side so that you can move your feet off the footplate and can step onto the
floor. The footplate can be flipped up so that you can step onto the floor.
Warning! Do not stand up on the footplate or foot support – the wheelchair will be able to tip up
and you risk losing your balance.
6
Advertisement
Table of Contents
