Push-To-Open Gate Operator Mounting - Polaris 700 Installation Manual

PUSH-TO-OPEN GATE OPERATOR
MOUNTING
(Open gate to outside of property)
For push-to-open applications, a push-to-open pivot
bracket should be used. This bracket must be purchased
separately (see List of Accessories).
The proper position of the mounting brackets is crucial
to the efficiency and leverage of the gate operator. The
distance between the gate operator and the gate is also
determined by the proper position of the mounting
brackets.
NOTE: Gate operator should be in the fully retracted position
before attaching the gate bracket and the post mount
bracket assembly.
Figure 10
X
Y

PUSH-TO-OPEN GATE OPERATOR MOUNTING

NOTE: Gate in CLOSED position
X = 6 inches
Y = 8 3/8 inches
NOTE: These dimensions provide optimal performance.
Deviation from these dimensions will reduce speed or
power to the extent the operator may not function
correctly.
12