TELEFONICA Wireless Router Installation Manual page 6

5
Connecting the Router to your PC. There are two options
A. Connection using Ethernet cable
Connect the yellow Ethernet cable
card and to one of the router´s connectors labeled as
ETHERNET 1x to 4x.
1
Start your PC. The Ethernet indicator will be green after a few
seconds.
For additional information, please consult the User Manual: section 3.3
6
(6) to the PC's Ethernet
6
B. Connection using wireless network
Activate the wireless network of your ADSL router. To do this,
press the WLAN button located at the back of the router, the
green WLAN indicator light will shine.
You will find the default configuration settings for your
wireless network on the label located below your router.
For additional information, please consult the User Manual: section 3.5
You must configure your PC
wireless client according to
these settings. Consult the
following page for further
information.