Table of Contents
Advertisement
Quick Links
JAPAN
http://www.planex.co.jp
E-mail: info-planex@planex.co.jp
4F, Win Kanda Takahashi Bldg
1-7, Kanda Sudacho Chiyoda-Ku
Tokyo 101-0041 Japan
Tel: +81-3-3256-9091 Fax: +81-3-3256-9207
TAIWAN
http://www.planex.com.tw
E-mail: info-planex@planex.com.tw
11F,No.190, Chung-Cheng Rd.,
Hsin-Tien, Taipei Hsien, Taiwan, R.O.C
Tel: +886-2-2910-0115 Fax: +886-2-2910-0116
Advertisement
Table of Contents
Related Manuals for Planex UE-100TX
Summary of Contents for Planex UE-100TX
- Page 1 JAPAN http://www.planex.co.jp E-mail: info-planex@planex.co.jp 4F, Win Kanda Takahashi Bldg 1-7, Kanda Sudacho Chiyoda-Ku Tokyo 101-0041 Japan Tel: +81-3-3256-9091 Fax: +81-3-3256-9207 TAIWAN http://www.planex.com.tw E-mail: info-planex@planex.com.tw 11F,No.190, Chung-Cheng Rd., Hsin-Tien, Taipei Hsien, Taiwan, R.O.C Tel: +886-2-2910-0115 Fax: +886-2-2910-0116...
-
Page 3: Ce Mark Warning
Contents subject to change without prior notice. Warnings: Wear an antistatic wrist strap to take other suitable measures to prevent electrostatic discharge whenever handling the equipment. Pci is a registered trademark of PLANEX COMMUNICATIONS INC. CE Mark Warning All other trademarks belong to their respective proprietors. -
Page 4: Troubleshooting
Chapter 2 Installation Provides a step-by-step procedure for installing the adapter under Windows98/98 Second Edition. This chapter also explains how to connect the UE-100TX to Ethernet networks. Chapter 3 Adjusting Windows98 Network Settings Describes how to setup a Windows95/98 peer-to-peer networking environment. -
Page 5: Table Of Contents
UE-100TX UE-100TX Appendix A Chapter 1 Introduction Troubleshooting ..........About USB ............Product Overview ..........Appendix B Features ............About Flow Control ......... System Requirements ........Appendix C Packing List ............Specifications ........... Parts Terminology ..........Chapter 2 Installation Driver Installation .......... - Page 6 Chapter 1 Introduction UE-100TX About USB USB (Universal Serial Bus) is a general purpose serial interface designed to connect a computer and low-to-middle speed devices. The standard was developed by Microsoft, Intel, IBM, Compaq, DEC, Northern Telecom and NEC, and was officially released in 1996.
-
Page 7: Features
USB cable. A USB device may connect to any port as long as the connector Using the UE-100TX, you can easily connect your PC with USB support to type matches. No loop is allowed in one bus tree, and a computer other than 10BASE-T/100BASE-TX Ethernet networks. -
Page 8: System Requirements
All USB devices support either Self Power mode or Bus Power mode. Those operating in Bus Power mode directly draw their power from the attached USB bus via the power line in a USB cable. The UE-100TX is a power thrifty device which employs Bus Power mode to operate. - Page 9 This number is also necessary to obtain all technical support services. Figure 1-3 < Upstream Port > The USB Type B connector is used to link the UE-100TX to a USB host (device). < RJ-45 Port > The RJ-45 port is used to connect the UE-100TX to Ethernet networks.
-
Page 10: Chapter 2 Installation
2. Attach the other end of the USB cable to the USB downstream port on your PC or a USB hub. Note : Before connecting the UE-100TX to a USB hub, verify that the USB hub is operating in Self Power mode. - Page 11 UE-100TX UE-100TX 3. Windows98 will automatically detect the UE-100TX as soon as it is 5. Insert the supplied driver diskette into your floppy drive, and click on the attached to the PC, and Hardware Wizard will start.3. Select “Search for Next button.
-
Page 12: Verifying The Installation
“Device Status”, it means that the driver has been on the “Device Manager” tab. Click on the “+” symbol on the left of installed successfully. [Network Adapter] and see if “UE-100TX USB Ethernet Adapter” will be visible. -
Page 13: Uninstalling The Adapter And The Driver
PC and 1 10BASE-T or 100BASE-TX cable is already attached to both below: 1)the RJ-45 port of the UE-100TX and 2) the RJ-45 port on your hub. 1. Open [My Computer], [Control Panel] and double click [System] to Enabling NetBEUI Protocol display the System Properties window. -
Page 14: Enabling Tcp/Ip Protocol
UE-100TX UE-100TX 2. Select “Microsoft” in the Manufacturers list, and click on “TCP/IP” in the Enabling TCP/IP Protocol Networking Protocols list. Click on the OK button. 1. From the Start button, select Settings and then Control Panel. Double- click the Network icon. - Page 15 UE-100TX cables) in a TCP/IP network. Note : 1. In the Network window, select “TCP/IP ->UE-100TX USB Ethernet A unique IP address must be assigned to each PC (network adapter). If the IP address of the first PC on your network is 192.168.100.101, the second PC must have a different IP address (Ex.
-
Page 16: Defining User Information
UE-100TX UE-100TX mask. other PCs on the network will not be displayed in the Network Defining User Information Neighborhood window. After NetBEUI or TCP/IP protocol has been enabled, you need to define the °Ω Computer Description user information of each networked PC. “Workgroup” refers to the name of Enter any additional information about the PC. - Page 17 Appendix A Troubleshooting UE-100TX PCs on your network. Check the following aspects of your system if the UE-100TX does not function properly. °˜ °¥ Is the USB Cable inserted firmly into each device? Each end of the supplied USB cable must be firmly inserted into the USB port of each device.
- Page 18 UE-100TX UE-100TX please try to do it slowly. other PCs on the network are visible. °Ω Networking Issues If the systems displays “Request Timed Out” as the result of ping command, °˜ °¥ Does the Link LED of the attached hub illuminate? verify that the hubs and cables are working properly.
- Page 19 To utilize IEEE802.3x flow control, the attached network card must also support IEEE802.3x flow control (as of now, most of the NICs on the market do not support this standard. The UE-100TX is the first USB Ethernet adapter equipped with this advanced feature).
- Page 20 Appendix C Specifications UE-100TX USB Classification : USB Spec1.1 Ethernet Standard Conformance : IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3x Flow Control Power Supply : Bus powered (directly draws its cable from the USB cable) Power Consumption : 500mA Max. USB Connector :...
- Page 21 UE-100TX UE-100TX...
- Page 22 UE-100TX UE-100TX...
- Page 23 UE-100TX...