ASROCK M810LMR User Manual page 28

Mainboard User's Manual
Standby Time Out This sets the timeout for Standby mode in
minutes. If the time selected passes without any
system activity, the computer will enter power-
saving Standby mode.
Suspend Time Out
This sets the timeout for Suspend mode in
minutes. If the time selected passes without any
system activity, the computer will enter power-
saving Suspend mode.
Display Time Out
This sets the timeout for display device in minutes.
If the time selected passes without any display
activity, the display will enter power-saving mode.
Hard Disk Time
This sets the timeout for hard disk in minutes. If
the time selected passes without any hard disk
Out
activity, the disk will enter power-saving mode.
Ring On Power On The system can be turned off with a software
command. If you enable this item, the system can
automatically resume if there is an incoming call
on the Fax/Modem. You must use an ATX power
supply in order to use this feature.
KeyBoard Power If you enable this item, you can turn the system on
and off by pressing hot keys on the keyboard. You
On
must enable the Keyboard Power On jumper in
order to use this feature.
RTC Alarm Power The system can be turned off with a software
command. If you enable this item, the system can
On / Date / Hour /
automatically resume at a fixed time based on the
Minute / Second
system's RTC (realtime clock). Use the items
below this one to set the date and time of the
wake-up alarm. You must use an ATX power
supply in order to use this feature.
24