Storing The Tire Sealant And Compressor Kit; Tire Changing - Buick Enclave 2011 Owner's Manual

10-68 Vehicle Care
Storing the Tire Sealant
and Compressor Kit
The tire sealant and compressor
kit is located in the storage
compartment on the driver side,
at the rear of the vehicle.
1. Press down on the latch tab and
pull the cover off to access the
storage compartment.
2. Press the two tabs on the quick
release buckle to release the tire
sealant and compressor kit
strap.
Ofrecido por www.electromanuales.com
3. Remove the sealant and
compressor kit from its tray.
To store the tire sealant and
compressor kit, reverse the steps.

Tire Changing

Removing Tools
The tools needed to remove the
spare tire are located in the storage
compartment on the driver side, at
the rear of the vehicle.
1. Open the jack storage
compartment by pulling on the
latch tab, located toward the rear
of the vehicle, and pulling the
cover off.
A. Tool Bag
B. Wing Bolt
C. Jack
2. Remove the wing bolt (B) by
turning it counterclockwise.
3. Push the jack (C) up out of the
holding bracket and remove the
tool bag (A).
4. Turn the jack on its side, with the
bottom facing toward you.
5. Pull the jack straight out, bottom
first.