Buick Enclave 2011 Owner's Manual page 122

5-4 Instruments and Controls
2. Press and hold
back to the previous folder list.
3. Press and release
to scroll up or down the list.
To select a folder, press
and hold , or press
when the folder is
highlighted.
To go back further in the
folder list, press and hold
.
To navigate folders on an iPod or
USB device for vehicles with a
navigation system:
1. Go to the Music Navigator by
first touching the center touch
screen folder button in the main
audio page.
2. While in Music Navigator, select
the folder/artist/genre/category,
etc. using the touch screen.
3. Press and release
scroll through the selected music
list. Touch the track label on the
Ofrecido por www.electromanuales.com
touch screen to highlight and
to go
begin playing the track from
that list.
or
4. Press and hold
scroll through the selected
music list.
(Mute/Push to Talk): Press to
silence the vehicle speakers only.
Press again to turn the sound on.
For vehicles with Bluetooth or
®
OnStar systems, press and hold
for longer than two seconds to
interact with those systems. See
Bluetooth on page 7 45 and the
OnStar Owner's Guide for more
information.
(End): Press to reject an
incoming call, or end a current call.
SRCE (Source/Voice
Recognition): Press to switch
between the radio, CD, and for
vehicles with, DVD, front auxiliary,
and rear auxiliary.
to
For vehicles with the navigation
system, press and hold this button
for longer than one second to
initiate voice recognition. See Voice
Recognition in the Navigation
System manual for more
information.
to quickly
(Seek): Press to go to the next
radio station while in AM, FM,
or XM .
For vehicles with or without a
navigation system:
Press to go to the next track or
chapter while sourced to the CD or
DVD slot.
Press to select a track or a folder
when navigating folders on an iPod
or USB device.
For vehicles with a navigation
system:
1. Press and hold
heard, to place the radio into
SCAN mode, a station will play
for five seconds before moving
to the next station.
2. To stop the SCAN function,
press again.
until a beep is