JVC LYT0242-001A Instructions Manual page 37

REW (2) Button
FF (3) Button
PLAY/PAUSE (4/6) Button
STOP (5) Button
Power Switch
FEATURE:
PURPOSE:
To pause during playback.
OPERATION:
1) Press PLAY/PAUSE (4/6) during playback.
2) To resume normal playback, press PLAY/PAUSE
NOTE:
If still playback continues for more than about 3
minutes, the camcorder's Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the
camcorder's power is automatically turned off.
FEATURE:
PURPOSE:
To allow high-speed search in either direction.
OPERATION:
1) Press FF (3) to forward or press REW (2) to
2) To resume normal playback, press PLAY/PAUSE
NOTES:
FEATURE:
Available only with the RM-V712U remote control
(provided) (
FEATURE:
Available only with the RM-V712U remote control
(provided) (
FEATURE:
Available only with the RM-V712U remote control
(provided) (
Still Playback
(4/6) again.
Shuttle Search
reverse during playback.
(4/6).
During playback, press and hold REW ( 2 ) or
FF ( 3 ). The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
A slight mosaic effect appears on screen during
Shuttle Search. This is not a malfunction.
Slow-Motion Playback
pg. 45).
Playback Zoom
pg. 46).
Playback Special Effects
pg. 47).
37
EN