Remote Control; Technical Specification - Opera Audio M100S plus User Manual

6. REMOTE CONTROL

The Consonance amplifier can be controlled by an optional Consonance system remote
control. Like other Consonance products, the number of buttons is kept to a minimum.
The volume of the amplifier can be operated by using the remote control.
The remote control uses four 1.5-volt LR03 AAA batteries .

7.Technical Specification

1. Power indicator
2. Power switch
3. Input select
4. Volume control
5. Remote control window
6. Input jacks (red / black).
7. Speaker connector
8.Individually adjustable
potentiometers for minimizing
hum
9. Serial number
10. Fuse
11. Power plug
TECHNICAL SPECIFICATION
CONTROL FUNCTIONS: Volume, Select, Power On/Off
POWER OUTPUT: 22 watt x 2, RMS 1kHz
TOTAL HARMONIC DISTORTION: less than 1%(10watt, 1kHz)
FREQUENCY RESPONSE: (-3dB points at 10 watt) 8Hz-60kHz
INPUT SENSITIVITY: 230mV
INPUT IMPEDANCE:100k ohms
OUTPUT IMPEDANCE: 4, 8 ohms. (User selectable.)
SIGNAL/NOISE: 90dB
CONSUMPTION: 120watt
INPUT INTERFACES: 3 groups (RCA) 1,2,3
OVERALL NEGATIVE FEEDBACK: Little
VACUUM TUBE: 300B x 4,12AX7 x 2, 6SN7 x 2
DIMENSIONS: 446(L) x 264(W) x 155(H) mm
WEIGHT: 20.5kg
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
6