JVC LYT0201-001A Instructions Manual page 51

Playback Effects
These effects allow you to be creative with the playback picture. You can use any one of the 4 effects.
PLAYBACK EFFECT
4 OFF
1 CLASSIC FILM
2 MONOTONE
B/W
3 SEPIA
4 STROBE
Play button
1 START PLAYBACK
Press the Play button (4).
2
ACCESS PLAYBACK EFFECT SELECT
MENU
Point the remote control at the camcorder's
remote sensor and press EFFECT. The
PLAYBACK EFFECT Select Menu appears.
3 SELECT PLAYBACK EFFECT
Move the pointer and highlight bar to the
desired effect by pressing EFFECT. The selected
function is activated and after 2 seconds the
menu disappears.
PLAYBACK EFFECT
Select Menu
EFFECT
NOTES:
The effects that can be used during playback are
Classic Film, Monotone, Sepia and Strobe . The
effects work the same in playback as they did in
recording. Refer to page 42 for more information.
Remote sensor
Power Dial
Lock button
T W
To deactivate the selected effect, press EFFECT
ON/OFF on the remote control. Pressing it again
re-activates the selected effect.
Repeat from step 2 when you want to change the
selected effect.
When "MONOTONE" or "SEPIA" is activated, the
"MULTI 4" and "MULTI 9" Snapshot modes
( pg. 29) are not available.
51
EN
PLAY
EFFECT ON/OFF