JVC LYT0089-001A Instructions Manual page 77

When the System Select Switch is set to "VIDEO":
SYMPTOM
RECORDING
Recording cannot be performed.
Recording does not start.
PLAYBACK
The tape is running, but there's no
playback picture.
Playback cannot be performed.
Playback picture is blurred or
interrupted.
The counter indication is blurred
during Still playback.
TAPE TRANSPORT
The tape stops during fast-forward
or rewind.
Rewinding or fast-forwarding cannot
be performed.
OTHER
The picture is blurred in the Quick
Review or Retake mode.
The date and time displays
disappear.
The wrong date and time are
displayed/recorded.
The tape won't eject.
POSSIBLE CAUSE(S)
Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes have
removable tabs. If the tab has been removed, cover the
hole with adhesive tape (
If the System Select Switch is set to "D.S.C.", it is not
possible to record onto the tape. Change the Switch
position to "VIDEO" (
The camcorder Power Switch has not been set to
"CAMERA" ( pg. 16).
The TV has not been set to its VIDEO mode.
If A/V connection is used, the TV's VIDEO/TV Switch has
not been set to VIDEO.
The RF unit has not been set to the correct channel.
If the System Select Switch is set to "D.S.C.", it is not
possible to play back a tape. Change the Switch position
to "VIDEO" ( pg. 40).
The video heads are dirty or worn out. Consult your
nearest JVC dealer for head cleaning or replacement.
This is normal.
The Counter Memory Function has been activated
( pg. 42).
The tape is already fully wound on one reel or the other.
This is normal while recording in the LP mode. Some
noise may be present while recording in the SP mode
( pg. 14).
If you remove the power source from the camcorder while
the power is on, all settings and selections are erased.
Make sure to turn the camcorder's power off before
disconnecting the power source.
If you have not performed Date/Time Setting (
the date and time are not displayed/recorded correctly. Be
sure that Date/Time setting is carried out.
The battery pack is running low.
pg. 15).
pg. 16).
77
EN
pg. 11),