Remote Control Button - Panasonic CS-S18NKUA Service Manual

13.2 Remote Control Button

13.2.1 SET Button
•
To check remote control transmission code and store the transmission code to EEPROM
Press "Set" button continuously for 10 seconds by using pointer
o
Press "Timer Set" button unit a "beep" sound is heard as confirmation of transmission code change.
o
13.2.2 RESET (RC)
•
To clear and restore the remote control setting to factory default.
Press once to clear the memory
o
13.2.3 RESET (AC)
•
To restore the unit's setting to factory default.
Press once to restore the unit's setting
o
13.2.4 TIMER ▲
•
To change indoor unit indicators' intensity:
Press continuously for 5 seconds.
o
13.2.5 TIMER ▼
•
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
Press continuously for 10 seconds.
o
36