Instruction Manual
Identification
Rabbet
Section
Frame
Clamp
36" Left Hand
Fence
Saw Rest
Parts List
Guide Bars
Left Hand Fence
Left Hand
Fence
Extension
Right Hand Fence
P I C T U R E F R A M I N G
Saw Assembly
Thumb Knob and
Guide Bars
Mounting Plate
Tension Knob
18" Right Hand
Fence
Saw Body and
Saw Handle with
Base Board
Screw Nuts
Saw Guide
Posts
Assembly Screws
Saw
Extension
Allen
Stop
Support
Wrench
Leg
Description
The Pro Saw Model F100-2 is a complete framing saw
system which will produce precise 45˚ miters for
picture frame corners. Features include measuring
scales, fence stop, adjustable angle setting, two
moulding clamps and a specially designed saw for
close tolerance cutting. Producing quality picture
frames is easier now than ever.
The Pro Saw Model F100-2 has undergone some recent
design and feature updates. While usage instructions
Tension Knob
remain essentially the same, you may notice that your
saw differs slightly in appearance from the saw shown in
the instruction manual, as well as on the enclosed DVD.
Frame
Thumb Knob and
Mounting Plate
(Not Seen)
Angle Pivot - Adjustment arm holds saw assembly. Rotate to various angle set-
tings from 45˚ to 90˚ to 45˚.
Clamp - Quick slide moulding clamp used to keep moulding secure for cutting.
Clamp Rods - Clamp support rods.
Fence and Scale - 36" to left section and 18" right section. The scale is special-
ly designed for measuring 45˚ picture frame miters.
Saw Rests - Device holds up saw so moulding can be maneuvered on fence.
Leg - Support for 36" fence section.
Rabbet - Undercut of moulding which holds frame material.
Saw Assembly - Saw blade is 24 tooth/inch for precise cutting. Knob allows
Saw Rest
simple blade change.
Saw Body and Base Board - Main platform of saw.
Angle Pivot
Saw Stop- Allows moulding to be cut in identical lengths.
Tension Knob - For keeping blade stiff.
Main Saw
Clamp Rod
Thumb Knob and Mounting Plate - Holding blade to frame.
Assembly
Parts List
18" Fence Extension
18" Left Hand Fence
18" Right Hand Fence
Allen Wrench
Bench Mounting Lag Bolts
Fence Connector Screws
Saw Handle with Screw Nuts 1
Saw Guide Posts
Guide Post Assembly Screws 4
Extension Support Leg
Main Saw Assembly
Saw Rests
Saw
Saw Stop
Rests
Guide Post
Bench
Mounting
Lag Bolts
PRO SAW
Model F100-2
1
1
1
1
2
4
4
1
1
2
1
www.logangraphic.com
L848N1
Rev 9/08