Logan Graphic Products F100-2 Instruction Manual

Instruction Manual
Identification
Rabbet
Section
Frame
Clamp
Saw Rest
Saw Body & Base Board
Saw Handle with Screw Nuts
Guide Bars
Saw Stop
Extension Support Leg
Saw Guide Posts
LoganGraphic.com
PICTURE FRAMING
Saw Assembly
Thumb Knob and Guide Bars
Mounting Plate
Tension Knob
18" Right
Hand Fence
Saw Rest
Angle Pivot
Main Saw Assembly
Clamp Rod
Saw Rests
Bench Mounting Lag
Bolts
Guide Post Assembly Screws
Allen Wrench
PRO SAW MODEL F100-2
Description
Tension Knob
The Pro Saw Model F100-2 is a complete framing saw system
which will produce precise 45˚ miters for picture frame corners.
Features include measuring scales, fence stop, adjustable
angle setting, two moulding clamps and a specially designed
Frame
saw for close tolerance cutting. Producing quality picture
frames is easier now than ever. The Pro Saw Model F100-2
has undergone some recent design and feature updates. While
usage instructions remain essentially the same, you may notice
Thumb Knob and
that your saw differs slightly in appearance from the saw shown
Mounting Plate
(not seen) in the instruction manual, as well as on the enclosed DVD.
Angle Pivot - Adjustment arm holds saw assembly.
Rotate to various angle settings from 45˚ to 90˚ to 45˚.
Clamp - Quick slide moulding clamp used to keep moulding secure for cutting.
Clamp Rods - Clamp support rods.
Fence and Scale - 36" to left section and 18" right section. Scale is specially de-
signed for measuring 45˚ picture frame miters.
Saw Rests - Device holds up saw so moulding can be maneuvered on fence.
Leg - Support for 36" fence section.
Rabbet - Undercut of moulding which holds frame material.
Saw Assembly - Saw blade is 24 tooth/inch for precise cutting. Knob allows simple
blade change.
Saw Body and Base Board - Main platform of saw.
Saw Stop - Allows moulding to be cut in identical lengths.
Tension Knob - For keeping blade stiff.
Thumb Knob and Mounting Plate - Holding blade to frame.
Parts List
18" Fence Extension 1
18" Left Hand Fence 1
18" Right Hand Fence 1
Allen Wrench 1
Bench Mounting Lag Bolts 2
Fence Connector Screws 4
Saw Handle with Screw Nuts 1
Saw Guide Posts 4
Guide Post Assembly Screws 4
Extension Support Leg 1
Main Saw Assembly 1
Saw Rests 2
Saw Stop 1
Exploded Parts
Diagram Available Online
at LoganGraphic.com
Warranty
Logan Graphic Products, Inc. ("Logan")
warrants the Pro Saw - Model F100-2, to
be free from defects in parts and workman-
ship for a period of one year from the date of
original purchase. Logan warrants that it will
either repair or replace, at its sole discretion,
any necessary replacement parts found to
be defective. Should the product need to be
returned to Logan for repair or replacement
parts, authorization for any return must come
from Logan in writing. Costs of returning the
product to Logan, including insurances, shall
be borne by the purchaser. Logan shall not be
liable for any damages or losses, incidental or
consequential, direct or indirect, arising from
the use of this product. This warranty extends
only to the original purchaser and is not as-
signable or transferable. This warranty is in lieu
of all other warranties, expressed or implied.
Be advised that any Logan products purchased
as "new" from an unauthorized dealer, such as
an online auction site or similar, may be void of
their warranty.
pg1
L848N2 8/11