Direct Printing With A Pictbridge Printer - JVC GZ-MG40E/EK Instructions Manual

Jvc hard disk camcorder
Table of Contents

Advertisement

M5E3PAL.book Page 47 Tuesday, June 14, 2005 1:40 PM
Direct Printing with a PictBridge
Printer
If your printer is compatible with PictBridge, still
images can be printed easily by connecting the
camera with the USB cable directly to the
printer. DPOF setting can also be used.
(
pg. 46)
NOTE:
After selecting [DIRECT PRINT] in the menu,
connect the USB cable.
To print by selecting a still image
1
Set the power switch to
2
Set the MODE switch to
3
Press MENU. The menu screen appears.
4
Press
/
to select [DIRECT PRINT], then
press 49. A message [PLEASE CONNECT
PRINTER] appears.
5
Connect the camera to the printer with the
USB cable.
After a while, the print menu appears.
6
Press
/
to select [SELECTED PRINT],
then press 49.
7
Press
/
to select the desired file, then
press 49.
8
Press
/
to set the
number of prints.
The number of prints can
be set from 1 to 99.
9
Press
/
to select
[DATE], then press
/
to select [ON] or [OFF].
Select [ON] to print the date or [OFF] not to print.
10
Press
/
to select [PRINT], then press
49. The image is printed.
To cancel print setting
Press
49.
To stop printing after printing starts
1
Press 49. The confirmation screen appears.
2
Press
press 49.
To print using the DPOF setting
If the printer is compatible with DPOF, you can
use the DPOF setting. (
1
Set the power switch to
2
Set the MODE switch to
3
.
Press MENU. The menu screen appears.
4
.
Press
press 49. A message [PLEASE CONNECT
PRINTER] appears.
5
Connect the camera to the printer with the
USB cable.
After a while, the print menu appears.
6
Press
press 49.
7
Press
49. The images are printed.
To confirm the DPOF setting, press
select [CHECK SETTINGS], then press 49.
After that, press MENU to return to the previous
menu.
NOTE:
01
NUMBER OF PRINTS
OFF
DATE
If the printer is not recognised, or to print again after
PRINT
direct printing with a PictBridge printer, remove the
CANCEL
USB cable, select [DIRECT PRINT] in the menu
again, and then reconnect the cable.
MasterPage: Menu_Right
MANAGING FILES
/
to select [CANCEL], then press
/
to select [EXECUTE], then
pg. 46)
.
.
/
to select [DIRECT PRINT], then
/
to select [DPOF PRINT], then
/
to select [PRINT], then press
47
EN
/
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents