Advertisement
- Press STANDBY button on the front panel or POWER button of Remote control, Power indicator is
green, the Plasma is in power ON mode, software start upgrader immediately.
- Hard Rest after the upgrader is finished.
Method: Sequence press F.WHITE, VIDEO, I.P.C. button on the Remote control enter factory Menu
select "Misc.", "Hard Reset", press Menu Left button to Hard Reset is finished.
- After the Hard Reset is finished, shut down the power switch, take out the RS-232C connection cables
after the power indicator is extinguished.
Note: The computer and plasma must be keep Power ON in the software upgrade processing.
Misc.
Hard Reset
Advertisement
